Moisture dry evenly - vertical dryer (used in food, chemical industry, aquatic feed and animal feed and plastic)
The use of "vertical", "crossing" and "flow", "rotation" (VCCR) principle to dry, porous cylinder vertical dryer is characterized by multiple sieve tray form the rotation of the overlapping deck, tray will stay dry products.Each pallet will tilt mechanical mechanism through a fixed position.Tilt, the product will slowly and gently slide to the next layer of the deck.Stacked deck helps to conserve energy and space requirements.All products are after the same drying conditions, so as to realize dry remarkably uniform and stable.Best way to counterflow heat transfer, effectively reduce the energy cost.To reduce the product contamination in a controlled way rapid transformation.
Vertical dryer technology is suitable for drying the highest hygiene standards in any need of particles.
1. The food
2. The chemical industry
3. The pet food
4. Fish feed: freshwater and saltwater fish feed, fish feed.
5. Plastic industry
Characteristics and advantages
- Material in multiple dry plate rotation, exposed in the constant drying air
- Need to empty the next layer, can quickly replace the product
- Tilt dry plate, inducing lead to reposition and mixed products to achieve uniform drying
- One of them adopt inverter speed regulation of spindle
- Entry, middle, and export rotary valve is used to control the continuous into the material, as the airlock
- Each layer of the deck are checking and maintenance mouth holes
- By containing air volume, temperature control, water evaporation calculator and energy efficiency indicator of HMI touch panel can easily control the moisture.
- And energy saving, odor removal of the drying and cooling air recirculation system are available.
Soft dry evenly
Each particle through elaborate processing
Application:
- Circular rotary dryer is composed of several dry slowly rotating disk.Being dry feed products from the top of the tray
- After rotation about a circle, the product discharge down one floor.In the process of unloading, process products are mixed, erased again
- Repeat the process until the product from the last dry discharge to exports
- Replace the product without stopping, just put the a layer of dry plate completely empty
- Vertical airflow and through the perforated circular dry plate
- Products in the countercurrent flow fixed do circular motion
- Product process as first in first out (FIFO).Every particles get the same treatment, at the same time, through the different air velocity and temperature
- The result is the best drying uniformity
Vertical dryer design in detail
Specially designed for producing high quality feed
- The retention time can be adjusted
The layer control - Rotary valve product entry
Even if the 100% fill will not damage the product - circular
- no dead Angle
- improve the air distribution
- more health - Products spreader
Spread the mass products and eggs - Short distance
Moderate emissions and mixed products, to achieve uniform drying - Below 50-200 - mm
- low compression load of products
- enhance the uniformity of water resources - Mechanical tilt CAM device
Roll hybrid products many times
| model | T - 225-4 | T - 300-5 | TT - 300-4-4 |
| Processing capacity1(t/h) | 1.5-2.0 | 3.0-3.5 | 5.0-6.0 |
| Processing capacity2(t/h) |
1.0-1.5 | 2.0-2.5 | 4.0-5.0 |
| Processing capacity3(t/h) | 3.5-4.0 | N/A | N/A |
Remark:
1) buoyancy fish, touch panel Ø 3.0 mm hole size, the moisture 24% (wet basis), the discharging water 10% (wet basis)
2) heavy fish feed, touch panel Ø 3.0 mm hole size, the moisture 26% (wet basis), the discharging water 10% (wet basis)
3Ø) shrimp feed, retinal hole size 2.0 mm, the moisture 16% (wet basis), the discharging water 12% (wet basis)
