The high efficiency cooling - counterflow cooling machine (used in aquatic feed, animal feed and pet food)
Counterflow cooling machine is used for cooling particles and extrudate.Temperature (hot) particles into the cooling machine, suction fan will air in the cooling machine, the cold air around again from the bottom into the cooling machine, promote particle temperature decrease.When the particles continue to pile up and when exposed to high instrument, pneumatic valve action immediately underlying particles emitted.High cooling efficiency.
Countercurrent cooling machine is especially suitable for granular products with good liquidity.Typical applications are aquaculture fish feed particles, pet food, animal feed particles, wood particle, pulp particle, etc.
Characteristics and advantages
- At the entrance to the rotation of the discharging valve used for continuous into and used as air brake
- Octagonal exterior design, ensure no dead Angle, reduce material accumulation, airflow can be evenly across the grain and take heat away
- Can the location of the vane type level gauge is put in accordance with the requirements, can be used to control the material retention time and capacity (cooling)
- By horizontal gate design pneumatic discharge door, gate controlled fully open, half open, seated three position
- Can choose a variety of steel, the fuselage outer mild steel for paint, cover and contact with the material discharging door for stainless steel mesh material
- Can choose SUS304 or SUS316 stainless steel material to make
model | CC - 02 a | CC - 05 a | CC - 07 a | CC - 10 a | CC - 15 a | CC - 17 a |
Processing capacity1(t/h) | 1 to 2 | 3-5 | 4 to 6 | 6-10 | 10-15 | 12-18 |
Processing capacity2(t/h) |
N/A | 1 to 2 | 3-4 | 5-6 | N/A | N/A |
Note:
1Ø) buoyancy fish expected, the mould plate hole size 3.0 mm, cool to room temperature plus or minus 3 ° C
2Ø) shrimp feed, the net die hole size 2.0 mm, cool to room temperature plus or minus 3 ° C