Extrusion press start wastes can be recycled waste - drying machine (for aquatic feed and pet food)
Extrusion press start wastes can be recycled!
Since the 1980 s, appropriate is been big of feed and food extrusion technology provides the complete solution;And for the start-up waste of extrusion machine dryer (type BN - 50 h) is one of the important auxiliary equipment.In the process of extrusion feed production, launch would produce a certain number of unqualified material.Should you provide the recycling of these materials greatly solution, rather than to throw it away.Our BN - 50 h drying machine is used to dry the wet material.These materials after drying can be used as a back material according to add certain amount during retrogradation.
Characteristics and advantages
- Capacity of 500 l
- With two feeding door, an exhaust pipe and a manual sliding door
- Install the space is little
- Can dry waste effectively
- The steam usage is low
- Drying time: 2.0 ~ 2.5 hours per batch
- After drying the moisture: 10 ~ 12%
- Removable type platform, easy to combination
- Other configuration are: the pressure gauge, thermometer, drain valves, pressure relief valve
- Using mild steel SS41 material is made
| model | BN - 50 h |
| Processing capacity (liters/batches) | 500 |
