Coarse grinding and fine grinding crusher system (used in aquatic feed, pet food, animal feed and biomass)
Appropriate large crusher for from the feed, food, oilseeds and biomass industry of various granular or powder products with high grinding efficiency.Application in accordance with the mill, crusher can be divided into two kinds:
- for the coarse grinding (mesh is greater than 2.0 mm), using coarse crusher (HMA - or XHM - series)
- for fine crushing (mesh as small as 0.5 mm), using fine crusher series (HMB)
Complete pulverizer system by a screw feeder or proportion of the grading feeding machine, crusher, finished product room, the filter unit and convulsions.
Wheat, corn, fish meal, soybean and other animal feed, pet food, aquatic feed and sawdust particles in industrial drying raw material crushing.
Characteristics and advantages
- Two-way direction of rotation
- Equipped with pneumatic cylinder can be quick in web design
- Speed up to 1800 RPM and 3600 RPM (60 Hz)
- Screen area range between 0.45 and 2.20 ㎡
- Double hammer pin design, can quickly change the hammer
- Bearing and crushing chamber temperature detection
- Tooth line and stationary hammer knife in order to improve the grinding efficiency
- Spindle and bearings with a single point of automatic lubricating device
- Shockproof base
XHM - series crusher
Appropriate large crusher is mainly used in feed, food, oilseeds, etc all kinds of granular or powder products.Large screen and tooth line design to ensure high crushing efficiency.Solid crushing chamber and offer low vibration production base.High precision dynamic balancing rotor increase service life.Coarse crusher usually collocation is greater than 2.0 mm sieve.
HMB - series crusher
Appropriate big fine crusher is mainly used in feed, food, grain and other fine powder of various kinds of materials.After the fine crusher is often used to mill.Cooperate with tooth line to ensure high speed rotating hammer crushing efficiency and fineness.Fine crusher usually served with a 1.5 ~ 0.5 mm sieve.
| model | HMB - 100. | XHM - 800. | XHM - 1000. | XHM - 1400. | ||||
| Horsepower (HP) | 75-100. | 150-215. | 215-330. | 330-470. | ||||
| Hammer of quantity (PCS) | 72 | 124 | 152 | 208 | ||||
| Processing capacity1(t/h) | 4 to 5 | 7-8 - | 8-10 | 10-12 | ||||
| Processing capacity2(t/h) | 6 to 7 | 12-13 | 15 to 17 | 18-20 |
Remark:
1), aquatic feed through the 1.5 mm sieve, water < 12%, oil content < 6%
2) corn, through the 2.5 mm sieve, water < 12%, oil content < 6%
