Super fine crushing - superfine mill (for shrimp feed, fish feed and pet food)
Should be a two way to control the mill fineness, use screen or do not use the screen.Crusher is designed for the production of ultrafine powder, using high speed rotating hammer and lining have broken in the process of contact force.
In the horizontal superfine mill, multiple screw conveyor to raw material into the crushing chamber.By beating, shearing and crushing effect producing ultrafine powder.The powder will be through the screen mesh and to filter through the air.Worm gear drive system can avoid air leakage, and through the electronic control system to adjust the main motor load.
Crusher can be used in the production of superfine powder, used in the production of shrimp feed, fish feed and pet food.
Characteristics and advantages
- Reducing energy input in order to achieve higher energy efficiency.
- Fully sealed clean design, reduce the energy consumption and maintenance costs
- Big crushing area to increase capacity in higher and higher fineness
- Easy to replace the screen and hammer to reduce downtime
- Heavy structure in order to reduce vibration
- Innovation design of crushing chamber, high grinding efficiency
Appropriate big AP - a series of horizontal superfine mill
The working principle of
Horizontal mill principle of work is as follows:
- Feed port
Small temporary gm for temporary storage, material will help guide to screw feeder. - Screw feeder
More screw feeder crush materials evenly spread throughout the region into the crushing chamber. - Lining with the hammer
Static plate hammer and move on in the process of impact will be broken material. - D. screen
Only fine material through the screen mesh. - E. pneumatic conveying
Material to be delivered to the separator, the heavier material will return to grind crush.
model | AP - 4 | AP - 5 | AP - 6 | AP - 7 | AP - 10 |
Horsepower (HP) | 100 | 150 | 200 | 250 | 300 |
Hammer quantity (PCS) | 48 | 60 | 72-84. | 84-98. | 120-140. |
Processing capacity1(t/h) | 0.8-1.5 | 1.2-2.5 | 2.0-3.5 | 3.0-4.0 | 3.5-5.5 |
Note:
1) aquatic feed, through the 1.0 mm sieve, 60 mesh, by 90%, water < 12%, oil amount < 7%