Dryer and cooler combination - vertical dryer and cooler (used in food, chemical industry, aquatic feed and animal feed and plastic)
Appropriate big TK series to integrate the dryer and cooling machine in a machine.A main shaft through the multiple decks.From drying the material will directly to the cooling zone.Compared with other independent (models) design, the combination of the two machines have the advantages of saving space and less control points, and dryer - cooling unit and excellent air system are used to realize efficient drying and cooling.
Rotary disc dryer and cooling machine technology is applicable to any need the highest hygiene standards of grain drying and cooling
1, food: baking flour
2, chemical industry: poison rat agent is added in wheat flour
3, aquatic products and animal feed industry: high moisture shrimp feed granulation.
4, plastic industry
Characteristics and advantages
- Material in multilayer dry plate rotation, exposed in the constant drying air
- Need to empty the next layer, can quickly replace the product
- Baked dry plate, lead to rearrange and mixed products to achieve uniform drying
- Using frequency converter speed regulation of spindle,
- Entry, middle, and export rotary valve is used to control the continuous into the material and also as a damper
- Each layer with inspection and maintenance of the hole mouth baking dish
- By containing air volume, temperature control, water evaporation calculator and energy efficiency indicator of HMI touch control panel can easily control the moisture content.
- And energy saving, odor removal of the drying and cooling air recirculation system are available.
Soft dry evenly
Each particle through elaborate processing
Application:
- Circular rotary dryer is composed of several dry slowly rotating disk.Being dry feed products from the top of the tray
- After rotation about a circle, the product discharge down one floor.In the process of unloading, process products are mixed, flow flat again
- Repeat the process until the product from the last dry discharge to exports
- Replace the product without stopping, just put the a layer of dry plate completely empty
- Vertical airflow and through the perforated circular dry plate
- Products in the countercurrent flow fixed do circular motion
- Product process as first in first out (FIFO).Every particles get the same treatment, at the same time, through the different air velocity and temperature
- The result is the best drying uniformity
Vertical dryer design in detail
Specially designed for producing high quality feed
- The retention time can be adjusted
The layer control - Rotary valve product entry
Even if the 100% fill will not damage the product - circular
- no dead Angle
- improve the air distribution
- more health - Products spreader
Spread the mass products and eggs - Short distance
Moderate emissions and mixed products, to achieve uniform drying - Below 50-200 - mm
- low compression load of products
- enhance the uniformity of water resources - Mechanical tilt CAM device
Roll hybrid products many times
| model | TK - 225-3-3 |
Processing capacity1(t/h) |
3.5-4.0 |
Note Note:
1Ø) shrimp feed, the net die hole size 2.0 mm, the moisture 16% (wet basis), the discharging water 10% (wet basis)
